Tips For Heating and Cooling Control

  • July 21, 2016
  • -
energy-saving-tips-assured-builders-winnipeg

Tips For Heating and Cooling Control

Tags :

Category : blog

Setback Thermostats

What is a Setback Thermostat?

Thermostats control heating and cooling appliances in houses. A setback thermostat gives the user the option of changing the temperature setting automatically at night and also during the work day when the occupants have left the house. A setback thermostat can help reduce overall household energy consumption.

A conventional thermostat simply regulates house heating at one temperature. For instance, in the winter, if you set the thermostat to 20°C (68°F), it will activate the heating system when the house temperature drops below 20°C and will shut the system off when the house air warms up past 20°C.

A setback thermostat contains an electronic clock. It can automatically turn down the temperature setting at night, when you are asleep, or during the day, when you are at work. It can also return the temperature to a more comfortable level before you wake up or arrive home from work. That way, you can have the energy savings of a lowered thermostat setting without the discomfort of having to wait for the house to heat up again.

The setback thermostat can also be used as a set-forward thermostat for an air-conditioning system. It can allow the house to heat up when it is unoccupied and return it to a comfortable temperature before occupants return from daytime activities.

Although this About Your House deals with setback thermostats and forced-air heating systems generally, you can apply some of the advice to electric baseboards or to summer usage.

You can use a standard thermostat to set your house temperature lower during times when the house is unoccupied. This will lead to similar energy savings as with a setback thermostat but without the convenience.

What Is a Normal House Temperature?

CMHC randomly surveyed Canadian houses. Thermostat settings in the winter tend to be quite closely grouped around 20°C – 21°C (68°F – 70°F). Summer temperatures range much more widely, depending upon whether the house has air conditioning.

To What Temperature Should I Set Back the Thermostat?

The more you reduce the thermostat setting, the greater the possibility for savings. Generally, a drop of 2°C (3.6°F) will lead to some savings and little risk. Some householders reduce temperatures 4°C – 6°C (7°F – 11°F). However, temperature differences this large create potential comfort and moisture problems that are discussed below.

Does Setting Back the Temperature Save Energy?

Yes. Research from the Canadian Centre for Housing Technology shows that winter setbacks for the houses tested would result in heating cost savings of five to fifteen per cent. The highest savings came with a setback of 6°C (11°F). See CMHC’s Research Highlight: Effects of Thermostat Setting on Energy Consumption.

Savings for the summer were about the same, although simply raising the thermostat set point in the summer from 22°C (71°F) to 24°C (75°F) led to more significant savings than the set-forward strategy and also offered better indoor humidity control.

Note that these savings are for two airtight, well-insulated, unoccupied houses. The savings in your home may vary but are likely to be in the same range.

What Can go Wrong?

There are several potential problems.

The first one relates to comfort. A cool house can be uncomfortable in the winter. If you wake up at night before the time the thermostat resets to 20°C or 22°C (68°F or 71°F), the rooms will be cooler. The same applies if you have a setback daily when you leave for work, but you return home earlier.

A setback schedule works best for people with predictable work and sleep periods. If your schedule is completely irregular, you might as well simply turn down a conventional thermostat when you sleep or leave the house, rather than trying to anticipate it with a setback thermostat.

A second problem is the possibility of high humidity in the winter.

Cool air can hold less moisture than warm air, so the relative humidity (RH) rises as the air cools. For instance, house air at a reasonable 35 per cent RH at 22°C (71°F) will see an increase to 50 per cent RH when the same air is allowed to cool to 16°C (61°F). This can lead to condensation on windows and walls (for instance, in closets or behind furniture).

Basically, you are creating a more humid environment, all things considered, when you allow the house temperature to drop significantly. This may not be a problem in a dry house or one where you can modify the humidity, for instance by turning off a humidifier. House humidity should be monitored, especially in the winter. For more information on how to measure humidity in houses, see CMHC’s About Your House fact sheet Measuring Humidity in Your Home.

Window condensation will be the first sign of excessive house humidity. Blinds and curtains usually increase the occurrence of condensation. If condensation is taking place, make sure that you wipe it up diligently or raise the temperature setback (for example, from 16°C to 17°C [61°F to 63°F]) until you have lowered house humidity levels and condensation is no longer a problem.

A third potential problem is a sustained lack of air circulation as the house cools down.

If you set back your thermostat in the evening from 20°C to 16°C (68°F to 61°F), the house may not cool to 16°C until 5 a.m. During that time, there will be no furnace circulation fan operation, unless you set the fan to run continuously. For houses where bedroom doors are kept closed, this could lead to stuffiness in those rooms and a lack of fresh air.

There are ventilation devices and furnace fan cycling controls that can compensate for this, if you find bedrooms and other rooms underventilated during setback periods. Setting back to a higher temperature, such as 18°C (64°F), will reduce the period of furnace inactivity (and your consequent savings). Setting the furnace fan to run continuously will help, but this will increase electricity consumption. See About Your House: How to Get the Ventilation That You Need in Your House for more information.

The final potential problem with setback thermostats is the time required to regain temperature, or to heat the house up once more.

An oversized furnace will return the house to the higher temperature quickly, but a properly sized furnace can take a long time — as much as one hour — to bring the house back to a comfortable temperature. You have to experiment with this, as it will depend on the type and relative size of your heating equipment and your home’s energy efficiency, as well as other factors.

If it takes an unacceptably long time for your house to heat up again, consider a smaller setback or start the high temperature setting earlier so that it is comfortable for you when you get out of bed or return from work.

Related to this problem is the length of time required for the room enclosure and furnishings to heat up. If your bathroom has cooled to 16°C (61°F) overnight and the furnace has kicked in at 6 a.m. to bring up the heat, your bathroom walls will still be cool when you start a shower at 7 a.m. Testing in the research house at the Canadian Centre for Housing Technology showed that it takes up to several hours for wall temperatures to return to their highest levels. Cool wall surface temperatures can lead to comfort and condensation problems.

What Houses Have the Greatest Risk for Problems?

Many houses will not see significant problems with the use of setback thermostats, but some are more at risk.

If you have a house with moisture problems in the winter (mold, condensation on windows, and so on), get those problems fixed before you consider installing a setback thermostat or set back your conventional thermostat.

If you have a forced-air furnace and closed bedroom doors, you will need to ensure adequate ventilation of bedrooms at night, one way or another.

If you already keep your house at an unusually low temperature (such as 18°C [64°F]), then a temperature setback is more likely to get you into the high humidity danger zone.

So, How Do You Set These Things Anyhow?

You may find electronic thermostats confusing, especially when compared to the simplicity of an older dial thermostat. Because each system is different, we can’t help you with this. Check your manual or ask someone who is familiar with setback thermostats to help you.

All These Problems — Is it Worth the Trouble?

Yes, it can be worth the trouble. If your house is in good condition, if you do not have excessive moisture problems, if you have a fairly regular schedule, then by all means use a setback thermostat. It will save energy. Just be aware that all energy-saving activities can have unexpected results, such as those outlined in this article, and be sure to take steps to avoid these problems.

 

 

Source: Canada Mortgage and Housing Corporation Website

https://www.cmhc-schl.gc.ca/en/co/grho/grho_002.cfm

  • July 5, 2016
  • -
Assured builders winnipeg hardwood floor maintenance

7 Tips For Hardwood Floor Maintenance

Tags :

Category : blog

In recent years, wooden flooring has reached further than it ever has before, namely into traditionally tile-only areas like kitchens and entryways. Driven by people’s desire for a seamless flow from room to room, this trend means hardwood is subject to increased wear and moisture. Depending on the level of exposure, water and other liquids can cause wood to discolour, warp, crack or rot. You should minimize direct moisture, using water very sparingly when cleaning and wiping spills promptly. The good news is that hardwood, whether solid or engineered, is protected these days with a plastic-like polyurethane coating. However, scratching can compromise the finish, so keep surface dirt in check and avoid wearing shoes (particularly high heels) inside.

  1. Vacuum your floor every week. You probably do this already, but it always bears repeating. The reason: underfoot, the fine grit in dust is just like sandpaper and will slowly but surely wear through your wood floor’s finish. So a good vacuuming protects the finish as well as keeps up its appearance. Use an attachment with a brush or a felt surface that runs along the floor. Attachments with rotating brushes or a beater bar can scratch the finish. Disengage the beater bar on an upright. If you don’t feel like hauling out the vacuum, a dust mop or one of the newer microfiber sweepers  will work just as well.
  2. Watch the hairspray and the furniture polish. Both of them can cloud your floor’s finish. Wipe them up immediately with a damp cloth. For a more thorough cleanup, spray with non-ammonia window cleaner.
  3. Keep out the rain. Water can not only ruin the finish on a hardwood floor but can penetrate deep into the wood and stain it. Close windows when you’re expecting rain. Put trays under potted plants and, of course, immediately wipe up any water you see.
  4. Remove residue with no-wax wood floor cleaner. Keep it in the hall closet or another convenient location so that you can get to it quickly to clean up small problems before they become big ones. Wipe up spills and dirt immediately; then use the cleaner to remove the residue. Dirt can damage the finish or get ground in. Liquids can damage the finish or stain the floor.
  5. Know the rules about using waxes and restorers. You can rejuvenate a wax finish with more wax. But never use wax on a surface finish such as shellac, varnish, or polyurethane. It not only makes the floor far too slippery, it also interferes with subsequent finishes. If the finish is polyurethane, use a polish made for polyurethane. If it’s another type of surface finish, get a general-purpose floor restorer, test the restorer on an inconspicuous area to make sure it won’t peel off.
  6. Use an extra-long “walk-off ” doormat. Doormats, inside and out, earn their keep and then some. While vacuuming and spot-cleaning are great, keeping the dirt out in the first place is even better. Get a 4- to 6-foot-long “walk-off ” mat for the front door. The longer the mat leading up to the door, the more people will rub dirt and moisture off their shoes as they walk in, even if they don’t stop to wipe them.
  7. Protect high-traffic zones with area rugs. Walking across an area several times a day eventually wears down a wood floor’s finish. Nice-looking throw rugs are the easiest way to reduce the wear. But make sure they don’t have a backing. Vinyl or rubber backing traps humidity, which can ruin your floor’s finish and stain or damage the wood.

 

  • July 4, 2016
  • -

10 Tips For Working With A Renovating Professional

Tags :

Category : blog

1. Define your goal: Start by making lists of what you like and don’t like in your home. Make sure that everyone who lives with you agrees with what’s on the lists. What activities do you do in each room? How do they relate to features you’d like to add? All this will help your contractors understand your goals.
2. Be an informed homeowner. Personal intrusion, noise, distractions, dust and inconveniences are often unavoidable but they can be managed if you prepare yourself and your family for the process of renovation. Make your home accessible to workers, and take time to understand their schedules. Some contractors may want to work from 7 a.m. to 3 p.m., others from 10 a.m. to 6 p.m. Discuss this with them so that their schedule accommodates your lifestyle. Plan some dinners out and a few weekend getaways to give you a break from the craziness around your house.

3. Be a good communicator. You must completely understand what you are getting into before you purchase any products or start any work. This means always asking questions, studying drawings and confirming all details with your contractor. A calendar and message centre can help you, your children, the contractor and tradespeople know what is happening in the house on any given day. Being accessible during the day (via cellphone or a work number) can help your contractor make fast, smart decisions as issues arise.

4. Plan to spend more than you thought.
On average, people spend 10 to 20 percent more on their renovations than originally planned. If you expect this at the outset, you’ll feel more at ease when you add a feature you forgot or indulge in a luxury or two.

5. Check about your contractor’s references when hiring someone you don’t know. Most of us find contractors through recommendations. A good contractor pays attention to details, such as placing drop cloths and cleaning the site each day, is courteous of your time, follows up with your questions and bills on a regular basis. Does he or she have a cellphone or an email address?

6. Use a contract, and be specific. Is there a start and finish date to this project? Are there provisions for extended completion dates, payment schedules and material specifications? Who buys what and who does what? Upon signing, the contractor will probably ask for a deposit – typically 10 to 20 percent of the total job. If he or she insists on something higher, you should consider this a red flag. And it goes without saying that you’d be wise to avoid cash deals.

7. Keep a project log. Use a simple folder to keep track of products you have specified, dates of certain installations and what happens each day at the house. This will become your memory bank of the day-to-day goings-on at a chaotic work site.

8. Plan to visit showrooms alone and with your contractor. When you go on your own, you can dream, get ideas and be creative. When you take your contractor, reality will hit. The contractor can advise you on what will work in your home and the materials that he or she feels comfortable working with.

9. Be accessible during installation times.
Confirm that the showrooms you have purchased from can have a contact available. You should also be accessible by phone during the installation dates of products you have chosen. Nothing is more stressful for a contractor than installing a bathtub only to find that a part is missing or wondering how high to hang your wall sconce.

10. Be open to new ideas and changes from your original plan. You may think everything is well thought out and planned but inevitably, changes will need to be made. A good contractor will offer solutions to small problems and use his or her experience from past jobs to recommend what works best.

 

 

 

 

 

 

*courtesy style at home